View the entire Rp Technik Collection here
Browse through our entire collection below, or if you would prefer to jump back to a particular series click either the blue or purple buttons on the top banner to switch back to either Glass Curtain Walls or Glass Doors & Windows to find a system that suits your needs and wants.
Glass Doors & Windows Types:
rp fineline 60W
Non-insulated, uniquely slim steel system for windows and partition walls. The face width of only 36 mm results in structures that provide maximum transparency. Ideal for the renovation of listed buildings. With its minimal face width, this profile system fades into the background of imposing architecture in an aesthetically attractive manner.
Performance characteristics
Extremely slim steel window and partition wall design system (non-insulated)
Resistance under wind load - ≤C3
Air permeability - ≤4
Watertightness - ≤7B/
Extremely slim face width of 36 mm
Also ideal for the renovation of listed buildings
Extremely slim face width of 36 mm
Planning advantages
-
Maximum transparency due to slim face widths from 36 mm (leaf-frame combination)
-
Delicate system made of steel for windows and partition walls
-
Ideal for renovating listed buildings or lofts
-
Can be used for turn or double casement windows and tiltable fanlights
-
Vast variety of fitting options – from nostalgic to modern
Processing advantages
-
Insertable gaskets
-
Moulded parts in double casement variants
-
Three fitting variants: “nostalgic”, “classic” and “standard”
-
Rebate screw-on barrel hinges of aluminium with excentric adjustment
rp fineline 70W
Thermally insulated design system for steel windows and partition walls with extremely slim face widths for ambitious new building projects and renovations subject to monument preservation requirements.
Performance characteristics
Extremely slim design system for windows and partition walls
Resistance under wind load - ≤C5 / B5
Air permeability - ≤4
Watertightness- ≤E900
Impact strength - 1
Thermal transmittance - Uf≥ 1.5 W/m²K
Sound insulation - ≤ 50 dB
Continuous performance test - 2
Mechanical performance - Requirements of Class CW / TC 2 / A fulfilled
Mechanical strength - 4
Various window types and opening styles, opening inwards and outwards
5 glazing bead designs
Planning advantages
-
Extremely slim face widths of only 45 mm for windows and doors (leaf-frame combination)
-
Various window types and opening styles
-
turn windows (opening inwards and outwards)
-
turn tilt window (opening inwards)
-
top hung and bottom hung windows (opening outwards)
-
fixed glazing
-
double casement windows
-
5 different glazing bead contours, identical for windows and doors
-
Stainless steel barrel hinges of only 15 mm in diameter; can optionally be coated in every RAL colour
-
Homogeneous outer appearance due to concealed drainage
-
70 mm profile depth
Processing advantages
-
Clip-on glazing beads for tool-free installation
-
Insertable gaskets
-
Dry and wet glazing is possible for frames and leaves
-
Moulded parts for double casement variants and gaskets
rp fineline 70D
Extremely slim steel door system (thermally insulated)
Performance characteristics
Resistance under wind load ≤C3 / B3
Air permeability ≤3
Watertightness ≤4A
Impact strength 1
Thermal transmittance Uf≥ 1.7 W/m²K
3 design variants for lock case integration
5 glazing bead designs
Planning advantages
-
Extremely slim face widths of 45 mm (leaf-frame combination)
-
Large dimensions are possible due to patented composite technology for thermally insulated profiles
-
5 different glazing bead contours, identical for windows and doors
-
3 design variants for lock case integration
-
Stainless steel barrel hinges of only 15 mm in diameter; can optionally be coated in every RAL colour
-
Homogeneous outer appearance due to concealed drainage
-
70 mm profile depth
-
3 optional threshold solutions for rp fineline 70D doors: “normal threshold”, “zero threshold” and “old building threshold”
Processing advantages
-
Clip-on glazing beads for tool-free installation
-
Insertable gaskets
-
Dry and wet glazing is possible for frames and leaves
-
Moulded parts for double casement variants and gaskets
rp fineline 50S
Slim system for non-insulated sliding elements
Performance characteristics
Resistance under wind load ≤C4
Air permeability ≤4
Watertightness ≤7B
Extremely slim face width.
Planning advantages
-
Extremely slim face width of the leaf of only 47 mm for sliding elements made of steel
-
Can be implemented with 2 or 4 movable leaves (scheme D, F)
-
Can be combined with fixed leaves (scheme A, C)
-
50 mm profile depth
Processing advantages
-
Bottom profile and slide rail of stainless steel
-
Screwed outer frame with corner connector
-
Insertable gaskets
-
Height-readjustable door slide mechanism
-
Optimised labyrinth area thanks to anti-friction-polymer-coated gaskets
Security Performance
rp hermetic 55W
Steel profile system for partition walls and windows to RC3 (non-insulated)
Performance characteristics
Burglar resistance: RC 3
Fire Rated Windows
Uniform face widths.
Planning advantages
-
Cost-efficient, non-insulated steel & glass system for partition walls Steel or stainless steel
-
Burglar resistance up to RC3 as a possible option
-
Uniform face widths due to the use of series profiles are also possible for fire and smoke protection doors of the rp hermetic 55FP series.
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads and moulded gasket parts
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
Smoke Performance
rp hermetic 55RS
Steel door profile system for 1-leaf and 2-leaf smoke protection doors
Performance characteristics
Continuous performance test : 200000
Continuous performance test: mechanical stress : C5 (approved)
Smoke protection (national: Germany) : RS-1 / RS-2
Smoke protection (Europe) : Sa, S200 (approved)
Steel or stainless steel
Planning advantages
-
Steel & glass system for smoke protection doors (1-leaf and 2-leaf)
-
Made of steel or stainless steel
-
Uniform overall appearance ensured by using series profiles also for fire and smoke protection doors
-
Seamless transitions at profile joints due to handicraft-type steel processing – compared to other materials, this offers the advantage of a planar, elegant mitre
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads and moulded gasket parts
-
Modular system for fire and smoke protection – one profile for various fire resistance classes
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
rp hermetic 70D
Steel door profile system for 1-leaf and 2-leaf doors
Performance characteristics
Resistance under wind load : up to C4
Air permeability : up to class 4
Watertightness : 7A (300Pa)
Impact strength : up to E5/I5
Bullet resistance : up to FB4NS (with armouring)
Burglar resistance : up to RC3
Thermal transmittance : ≥ 1,4 W/(m²K)
Sound insulation : ≤ 36 dB (-2/-4)
Finger trap protection : yes
Continuous performance test : 200.000; 1 Mio.
Continuous performance test: mechanical stress : up to C5; C8
Ability to release : fulfilled
Mechanical performance : fulfilled
Mechanical strength : up to class 4
Seamless transitions at profile joints, with planar mitres, further enhance the elegant impression.
Planning advantages
-
Steel & glass system for doors (1-leaf and 2-leaf)
-
Finger trap protection and folding sliding doors as possible options
-
Optionally also available in a highly insulating variant
-
Uniform appearance of all rp hermetic 70 door, window and partition wall systems
-
The glass surfaces of windows and partition walls are in the same surface plane
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Can be produced in continuously hot-dip coated steel and high-grade stainless steel
-
Depending on the requirements, infill thicknesses of up to 69 mm are possible
-
No weather bar for the sake of a homogeneous appearance
-
Optimum tightness thanks to three sealing levels
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads and moulded gasket parts
-
Tool-free glazing bead installation without screw connections
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Dry glazing with vapour pressure equalization and drainage system
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
rp hermetic 55D
Steel door profile system for 1-leaf and 2-leaf doors
Performance characteristics
Resistance under wind load : C2
Air permeability : 2
Watertightness : 4A
Burglar resistance : RC 3
Finger trap protection : yes
Ability to release : fulfilled
Mechanical strength : 4
Optionally also available for smoke protection doors and finger trap protection doors with the same face widths, or in a burglar-resistant design up to RC3.
Planning advantages
-
Economical steel & glass system for 1-leaf and 2-leaf doors
-
Made of steel or stainless steel
-
Optionally configured as a finger trap protection door
-
Burglar resistance up to RC3 as a possible option
-
Uniform face widths due to the use of series profiles are also possible for fire and smoke protection doors of the rp hermetic 55FP series.
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads and moulded gasket parts
-
Tool-free glazing bead installation without screw connections
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Dry glazing with vapour pressure equalization and drainage system
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
rp hermetic 70W
Thermally insulated steel window system for attractively designed 1-leaf and 2-leaf windows and partition walls: the glass surfaces of windows and partition walls are in the same surface plane; seamless transitions at the profile joints, with planar mitres, further enhance the elegant impression.
Performance characteristics
Steel window system for 1-leaf and 2-leaf windows and partition walls (thermally insulated)
Resistance under wind load - C2; C3; C4 / B4; C5 / B5 (Windows)
Air permeability - 3; 4 (Windows)
Watertightness - 8A (Windows)
Impact strength - 1 (Windows)
Bullet resistance - FB4NS
Burglar resistance - RC1N; 2; 2N; 3
Thermal transmittance - > 1,7 W/(m²K) (Windows)
Continuous performance test: mechanical stress - 2 (Windows)
Operating forces - 1 (Windows)
Fall protection barrier glazing - fulfilled (Partition walls)
Mechanical performance - fulfilled
Mechanical strength - 3 (Windows)
Tool-free installation of glazing beads
The glass surfaces of windows and partition walls are in the same surface plane
Planning advantages
-
Steel & glass system for windows (1-leaf and 2-leaf) and partition walls
-
Optionally also available in a highly insulating variant
-
Uniform appearance of all rp hermetic 70 door, window and partition wall systems
-
The glass surfaces of windows and partition walls are in the same surface plane
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Can be produced in continuously hot-dip coated steel and high-grade stainless steel
-
Depending on the requirements, infill thicknesses of up to 69 mm are possible
-
No weather bar for the sake of a homogeneous appearance
-
Optimum tightness thanks to three sealing levels
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads and moulded gasket parts
-
Tool-free glazing bead installation without screw connections
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Dry glazing with vapour pressure equalization and drainage system
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
Bullet Performance
rp hermetic 75BR
Bullet-resistant system for doors and partition walls
Performance characteristics
Bullet resistance : FB4NS; FB6NS
75 mm profile depth, 1.8 mm wall thickness.
Planning advantages
-
Steel & glass system for doors and partition walls in compliance with resistance classes FB4 and FB6
-
Enhanced stability due to its profile depth of 75 mm and wall thickness of 1.8 mm
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads and moulded gasket parts
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
EW & EI Fire Performance
rp hermetic 70FP-30
Steel door profile system for fire and smoke protection doors and partition walls
Performance characteristics
Burglar resistance : RC(2); 3
Sound insulation : < 44 dB (-1/-2) for Doors
Continuous performance test : 200.000; 1 Mio.
Continuous performance test: mechanical stress : C5; C8
Fire protection F (partition walls) : F30
fire protection T (doors) : T30
Fire protection EW (doors) : EW30
Fire protection EI (doors) : EI230
Smoke protection (national: Germany) : RS-1 / RS-2 (Doors)
Smoke protection (Europe) : Sa, S200 (Doors)
Ability to release : fulfilled
Fall protection barrier glazing : fulfilled (Partition walls)
Mechanical performance : fulfilled
Mechanical strength : 4 (Doors)
One profile for various fire resistance classes.
Planning advantages
-
Steel profile system for fire and smoke protection doors and partition walls
-
Made of steel or stainless steel
-
Identical face width for doors and partition walls
-
Depending on the requirements, infill thicknesses of up to 54 mm for doors are possible.
-
Design freedom due to optionally screwed square and rectangular profiles as well as elbows as glazing bead.
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Modular system for fire and smoke protection – one profile for various fire resistance classes
-
Prefabricated insulators for the lock region
-
Profiles can be delivered in a filled or unfilled condition
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
EW & EI Fire Performance
rp hermetic 70FP-60
Steel profile system for fire and smoke protection doors and partition walls
Performance characteristics
Sound insulation : < 43 dB (0/-1) for Doors
Continuous performance test : 200.000; 1 Mio.
Continuous performance test: mechanical stress : C5; C8
Fire protection E (partition walls) : E90
Fire protection EW (doors) : EW90
Fire protection EI (doors) : EI260
Ability to release : fulfilled
Mechanical performance : fulfilled
Mechanical strength : 4 (Doors)
One profile for various fire resistance classes.
Planning advantages
-
Steel profile system for fire and smoke protection doors and partition walls
-
Made of steel or stainless steel
-
Identical face width for doors and partition walls
-
Depending on the requirements, infill thicknesses of up to 54 mm for doors are possible.
-
Design freedom due to optionally screwed square and rectangular profiles as well as elbows as glazing bead.
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Modular system for fire and smoke protection – one profile for various fire resistance classes
-
Prefabricated insulators for the lock region
-
Profiles can be delivered in a filled or unfilled condition
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
EW & EI Fire Performance
rp hermetic 70FP-90
Steel profile system for fire & smoke protection doors and partition walls
Performance characteristics
Sound insulation < 43 dB (-1/-2)
Continuous performance test 200.000; 1 Mio.
Continuous performance test: mechanical stress C5; C8
Fire protection Partition walls
Fire protection EW (doors) EW90
Fire protection EI (doors) EI90
Smoke protection (national: Germany) RS-1 / RS-2 (Doors)
Smoke protection (Europe) Sa, S200 (Doors)
Ability to release - fulfilled
Mechanical performance - fulfilled
Mechanical strength - 4 (Doors)
The identical face width of doors and partition walls
One profile for various fire resistance classes
Planning advantages
-
Steel profile system for fire and smoke protection doors and partition walls
Made of steel or stainless steel
Identical face width for doors and partition walls
Depending on the requirements, infill thicknesses of up to 54 mm for doors are possible.
Design freedom due to optionally screwed square and rectangular profiles as well as elbows as glazing bead.
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Modular system for fire and smoke protection – one profile for various fire resistance classes
-
Prefabricated insulators for the lock region
-
Profiles can be delivered in a filled or unfilled condition
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
EW & EI Fire Performance
rp hermetic 70FP-120
Steel profile system for partition walls with high fire protection requirements
Performance characteristics
Fire protection EI (partition walls) : EI120
High fire rating.
Planning advantages
-
Steel & glass system for fire protection partition walls compliant with classification EI120
-
Seamless transitions at profile joints due to handicraft-type steel processing – compared to other materials, this offers the advantage of a planar, elegant mitre
Processing advantages
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
-
Highest stability due to a design depth of 90 mm and a wall thickness of 1.8 mm
E & EW Fire Performance
rp hermetic 55FP-30
Steel door profile system for fire protection doors and partition walls
Performance characteristics
Fire protection E (partition walls) : E30
Fire protection EW (partition walls) : EW30
Fire protection E (doors) : E30
Fire protection EW (doors) : EW30
Steel or stainless steel.
Planning advantages
-
Non-insulated steel profile system for fire protection doors and partition walls
-
Made of steel or stainless steel
-
Uniform overall appearance ensured by using series profiles also for fire and smoke protection doors
-
Same appearance as rp hermetic 55W (windows) and rp hermetic 55D (doors)
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Modular system for fire and smoke protection – one profile for various fire resistance classes
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
E & EW Fire Performance
rp hermetic 55FP-60
Steel door profile system for fire protection doors and partition walls
Performance characteristics
Fire protection E (partition walls) : E60
Fire protection EW (partition walls) : EW60
Fire protection E (doors) : E60
Fire protection EW (doors) : EW60
Steel or stainless steel.
Planning advantages
-
Non-insulated steel profile system for fire protection doors and partition walls
-
Made of steel or stainless steel
-
Uniform overall appearance ensured by using series profiles also for fire and smoke protection doors
-
Same appearance as rp hermetic 55W (windows) and rp hermetic 55D (doors)
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Modular system for fire and smoke protection – one profile for various fire resistance classes
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
E & EW Fire Performance
rp hermetic 55FP-90
Steel door profile system for fire protection doors and partition walls
Performance characteristics
Fire protection E (partition walls) : E90
Fire protection EW (partition walls) : EW90
Steel or stainless steel.
Planning advantages
-
Non-insulated steel profile system for E90/EW90-compliant fire protection partition walls
-
Made of steel or stainless steel
-
Uniform overall appearance ensured by using rp hermetic series profiles, also for fire and smoke protection doors
-
Same appearance as rp hermetic 55W (windows) and rp hermetic 55D (doors)
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Modular system for fire and smoke protection – one profile for various fire resistance classes
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
E & EW Fire Performance
rp hermetic 55FP-120
Steel profile system for fire protection partition walls
Performance characteristics
Fire protection E (partition walls) : E120
Fire protection EW (partition walls) : EW120
Steel or stainless steel.
Planning advantages
-
Non-insulated steel profile system for E120/EW120-compliant fire protection partition walls
-
Made of steel or stainless steel
-
Uniform overall appearance ensured by using rp hermetic series profiles, also for fire and smoke protection doors
-
Same appearance as rp hermetic 55W (windows) and rp hermetic 55D (doors)
-
Compared to other materials, steel offers the advantage of a planar, elegant mitre due to seamless transitions at the profile joints
-
Compatible with other RP Technik window, door and curtain wall systems
Processing advantages
-
Better cost-effectiveness due to great ease of processing, e.g. thanks to clip-on glazing beads
-
Modular system for fire and smoke protection – one profile for various fire resistance classes
-
Precise and quick processing through the use of system-optimised tools and auxiliary means
-
Cross-series accessories
-
Better weldability and effective anti-corrosion protection due to continuously hot-dip coated zinc-magnesium surface
Curtain Wall Types
rp tec 45
Slim mullion-transom curtain wall for large spans
Performance characteristics
Resistance under wind load: ±1375 Pa; Security ±2062 Pa
Air permeability: AE
Watertightness: RE 1200
Impact strength: E5-I5
Burglar resistance: RC4
Thermal transmittance: Ucw ≥ 1,4 W/m²K
Sound insulation: ≤ 41 dB
Face width of 45mm for transparent, modern architecture.
Planning advantages
-
Elegantly slim face width of 45 mm
-
Suitable for large spans as the modulus of elasticity of steel is three times higher than that of aluminium
-
Vertical and polygonal configurations are possible
-
Compatible with rp tec add-on curtain walls and with rp fineline and rp hermetic window profiles
Processing advantages
-
Economical processing due to straight cuts and optimised assembly sequences
-
Great ease of use thanks to innovative screw-and-plug connection
-
Compatible with rp tec add-on curtain walls and with rp fineline and rp hermetic window systems
rp tec 50-1
Add-on curtain wall of mullion-transom design for steel and wooden substructures
Performance characteristics
Resistance under wind load : +2000/-3200 Pa; Safety +3000/-4800 Pa
Air permeability : AE
Watertightness : RE 1500
Impact strength : E5-I5
Burglar resistance : RC 3
Thermal transmittance : Ucw≥0.60 W/m²K (0.56 in Variant "Plus")
Sound insulation : ≤ 47 dB
Face width of 50mm for transparent, modern architecture.
Planning advantages
-
50 mm face width for modern, transparent architecture
-
Suited for glass roofs with 0° pitch
-
Vertical and polygonal curtain walls up to 30°
-
Meets passive building requirements
-
Can also be configured as heated curtain walls
-
3-level sealing system
Processing advantages
-
Easy to process due to modular system structure
-
Proven connection types for cost-effective production: Nail fastening system, set stud technology, screw connection
rp tec 50-1SG
All-glass add-on curtain wall (structural glazing)
Performance characteristics
Burglar resistance : RC 2
Face width of 50mm for transparent, modern architecture.
Planning advantages
-
Structural glazing curtain wall designed as an add-on structure for steel and wooden substructures
-
Vertical and polygonal curtain walls up to 30°
-
Burglar resistance up to RC2
-
Face width of 50 mm
Processing advantages
-
Easy to process due to modular system structure
-
Proven connection types for cost-effective production: Nail fastening system, set stud technology, screw connection
rp tec 55
Mullion-transom curtain wall, also suited for 0° roof glazing solutions
Performance characteristics
Resistance under wind load +2000/-3200 Pa; Safety +3000/-4800 Pa
Air permeability AE
Watertightness RE 1800, RE 2400 (0° roof)
Impact strength E5-I5
Burglar resistance RC 3
Thermal transmittance Ucw ≥ 0,59 W/m²K
Sound insulation ≤ 47 dB
Face width of 55mm for transparent, modern architecture.
Planning advantages
-
Mullion-transom steel curtain wall
-
Face width of 55 mm
-
Can be used for vertical, polygonal and 0° roof glazing solutions
-
Suitable for large spans because steel offers 3 times the load carrying capacity of aluminium.
Processing advantages
-
Economical processing due to straight cuts and optimised assembly sequences
-
Compatible with rp tec add-on curtain walls and with rp fineline and rp hermetic window systems
rp tec 55SG
All-glass mullion-transom curtain wall (structural glazing)
Performance characteristics
Burglar resistance : RC 2
High structural strength system.
Planning advantages
-
Structural glazing curtain wall
-
Mullion-transom steel curtain wall system
-
Face width of 55 mm
-
Can be used for vertical, polygonal and 0° roof glazing solutions
-
Burglar resistance up to RC2
-
Suitable for large spans because steel offers 3 times the load carrying capacity of aluminium.
Processing advantages
-
Economical processing due to straight cuts and optimised assembly sequences
-
Compatible with rp tec add-on curtain walls and with rp fineline and rp hermetic window systems
rp tec 55-1
Add-on curtain wall of mullion-transom design for steel and wooden substructures
Performance characteristics
Resistance under wind load : +2000/-3200 Pa; Security +3000/-4800 Pa
Air permeability : AE
Watertightness : RE 1500
Impact strength : E5-I5
Burglar resistance : RC 3
Thermal transmittance : Ucw ≥ 0.55 W/m²K (Plus version)
Sound insulation : ≤ 47 dB
Face width of 55mm for transparent, modern architecture.
Planning advantages
-
Add-on curtain wall of mullion-transom design for steel and wooden substructures
-
Face width of 55 mm
-
Suited for glass roofs with 0° pitch
-
Vertical and polygonal curtain walls up to 30°
-
Meets passive building requirements
-
Can also be configured as heated curtain walls
Processing advantages
-
Easy to process due to modular system structure
-
Proven connection types for cost-effective production: Nail fastening system, set stud technology, screw connection
Bullet Performance
rp tec 55-1BR
Add-on steel curtain wall for bullet and burglar resistance
Performance characteristics
Air permeability : AE
Watertightness : RE 1500
Impact strength : E5-I5
Bullet resistance : FB 4
Burglar resistance : RC 3
Thermal transmittance : Ucw ≥ 0,59 W/m²K
Bullet & burglar resistance
Planning advantages
-
Add-on curtain wall of mullion-transom design for steel and wooden substructures
-
Vertical and polygonal curtain walls up to 30°
-
Face width of 55 mm
-
Bullet resistance up to FB4 for for steel substructures
-
Burglar resistance up to RC3
Processing advantages
-
Easy to process due to modular system structure
-
Proven connection types for cost-effective production: Nail fastening system, set stud technology, screw connection
rp tec 55-1SG
All-glass add-on curtain wall (structural glazing)
Performance characteristics
Burglar resistance : RC 2
Thermal transmittance : Ucw ≥ 0,84 W/m²K
High structural strength system.
Planning advantages
-
Variable curtain wall system featuring a face width of 55 mm for wooden or steel substructures
-
Suited for vertical and polygonal curtain walls and 0° pitch roof glazing solutions
-
Vertical and polygonal curtain walls up to 30°
-
Meets passive building requirements
Processing advantages
-
Easy to process due to modular system structure
-
Proven connection types for cost-effective production: Nail fastening system, set stud technology, screw connection
rp tec 60
Mullion-transom curtain wall with a face width of 60 mm for large spans
Performance characteristics
Resistance under wind load : ±1375 Pa / Security ±2062 Pa (facade) ±2000 Pa / Security ±3000 Pa (for 3° glass roof)
Air permeability : AE
Watertightness : RE 1200
Impact strength : E5-I5
Thermal transmittance : Ucw ≥ 1,7 W/m²K
Sound insulation : ≤ 45 dB (vertical glazing)
Face width of 60mm.
Planning advantages
-
Mullion-transom curtain wall system with a face width of 60 mm
-
Vertical and polygonal configurations are possible
-
Also suited for 3° roof glazing
-
Suitable for large spans because steel offers 3 times the load carrying capacity of aluminium.
-
Compatible with rp tec add-on curtain walls and with rp fineline and rp hermetic window profiles
Processing advantages
-
Economical processing due to straight cuts and optimised assembly sequences
-
Great ease of use thanks to innovative screw-and-plug connection
-
Compatible with rp tec add-on curtain walls and with rp fineline and rp hermetic window systems
Bullet Performance
rp tec 60BR
Mullion-transom curtain wall for high safety requirements.
Performance characteristics
Resistance under wind load : ±1375 Pa, Security ±2062 Pa
Air permeability : AE
Watertightness : RE 1200
Impact strength : E5-I5
Bullet resistance : FB 6
Burglar resistance : RC4
Burglar resistance up to RC4, bullet resistance up to FB6
Download Technical Document [coming soon]
Planning advantages
-
Mullion-transom steel curtain wall for high safety requirements
-
Face width of 60 mm
-
Burglar resistance up to RC4
-
Bullet resistance up to FB6
-
Suitable for large spans because steel offers 3 times the load carrying capacity of aluminium.
Processing advantages
-
Economical processing due to straight cuts and optimised assembly sequences
-
Compatible with rp tec add-on curtain walls and with rp fineline and rp hermetic window systems
rp tec 60-1
Add-on curtain wall with 60 mm face width for passive building requirements
Performance characteristics
Resistance under wind load : +2000/-3200 Pa; Security +3000/-4800
Air permeability : AE
Watertightness : RE1500
Impact strength : E5-I5
Thermal transmittance : Ucw≥ 0,82 W/m²K
Sound insulation : ≤ 47 dB
3-level sealing system.
Planning advantages
-
Add-on curtain wall with a face width of 60 mm
-
Vertical and polygonal curtain walls up to 30°
-
Meets passive building requirements
-
3-level sealing system
-
Can also be configured as heated curtain walls
Processing advantages
-
Easy to process due to modular system structure
-
Proven connection types for cost-effective production: Nail fastening system, set stud technology, screw connection
rp tec 80-1
Add-on curtain wall with 80 mm face width for passive building requirements
Performance characteristics
Resistance under wind load : +2000/-3200 Pa; Security +3000/-4800 Pa
Air permeability : AE
Watertightness : RE1500
Impact strength : E5-I5
Thermal transmittance : Ucw ≥ 0,63 W/m²K
Sound insulation : ≤ 47 dB
3-level sealing system.
Planning advantages
-
Variable add-on curtain wall system with a face width of 80 mm
-
Vertical and polygonal curtain walls up to 30°
-
Meets passive building requirements
-
3-level sealing system
-
Can also be configured as heated curtain walls
Processing advantages
-
Easy to process due to modular system structure
-
Proven connection types for cost-effective production: Nail fastening system, set stud technology, screw connection